Swimming Pool Wholesale Warehouse
E-Z Chlorine Care

POOLS CHLORINATED WITH AUTOMATIC CHLORINATORS, FLOATERS OR SKIMMERS USING STABILIZED CHLORINE . . . . . . . .

To start . . . adjust pH to 7.2 - 7.4 with pH Plus or Minus. Test total alkalinity. T.A. should be between 95 - 125 PPM. Raise total alkalinity by chart on container on container of Alkalinity Plus. Also have hardness checked once a year. Hardness should be 180-240. Raise hardness with Calcium Plus according to the chart on container.
1. Fill automatic chlorinating device.

2. Add 1 oz 65% Chlorine (HTH) or Shock per 1000 gallons.

3. Add 2 pounds stabilizer per 10000 gallons.
If pool was stabilized in previous years, have your stabilizer levels tested.

Optimum level is 25 parts per million.

Once a week . . .
1. Backwash or clean filter as needed. Only backwash when your gauge rises 4-8 PSI. Frequent unneeded backwashing lessens the efficiency of a sand filter.

2. Test and adjust PH.

3. Shock pool with 2 oz. 65% Chlorine (HTH) or Shock per 1000 gallons.

4. Refill chlorinator, floater or skimmer with stabilized chlorine.

5. Add 1 quart 10% HTH Algaecide per 25000 gallons

USE YOUR TEST KIT EVERY DAY. NEVER PUT 65% CHLORINE (HTH) IN THE FLOATER OR THE CHLORINATOR.

Take me back to the home page..

Swimming Pool Wholesale Warehouse E-mail

1-931-684-5030 (x185) for phone help

I look best with...... Click here to start....